SAFETY STEP 2 X 10 YELLOW

BC Traffic Specialist

$0.00 
SKU: SSTD2X10W-04

Description

Truncated-dome tactile warning pattern for pavement

Uses:

Use either the SSTD-Traditional Mat System or the SSTD Ramp Up Mat where ADA, transit, or building codes require a tactile warning surface, such as at transit boarding platforms, curb ramps, and hazardous vehicular areas. The system may be installed directly on concrete or asphalt.

Product Attributes

The system consists of a patterned mat plus adhesives and coating to form an ADA compliant high-contract, breathable surface
SSTD easily handles curves, pavement joints, and concrete-asphalt transitions.

Applicable Standards

SSTD is compatible with: ADA Accessibility Guidelines (ADAAG) Section 4.29.2
California Division of the State Architect (DCA) IR 11B-2,1R 11B-3, and 1R 11B-4

Performance criteria

Abrasion Test, ASTM D1242: Thickness loss 1.5%
Accelerated Weathering, 1500 Hours QUV: No Effect on Film Integrity
Bond Strength, ASTM C297: Concrete. 290 PSI; Plywood, 155 PSI
Bond Strength after Accelerated Aging, ASTM D756: 249 PSI
Compressive Strength, ASTM C 109: 5690 PSI
Concentrated Load, ICC ES AC39: No apparent damage.
Average penetration, 0.031; Residual, 0.020 inches
Fire Test, ASTM E108: Class A Flexural Strength, 1835 PSI
Impact Strength: 22 in/lbs
Impact test, ASTM D 3220:
No Cracking Percolation Test, AC39 Sec,IV G: 0.25 inches
Tensile Strength ASTMC 190 85:855 PSI
Water Absorption, ASTM D570:6,5% Water Ponding, ASTM
E96:0.0102 grams/24 hours
Water Vapor Transmission, ASTM E96 84:0,958 PERM

HANDLING
Protect adhesives, mat & coating from freezing prior to application.

WARRANTY
Five-year limited material warranty

LIMITATIONS
Do not apply in temperatures below 55 F (13 C). Weather conditions and climate may vary cure time of applicable surfaces, but a 7 day minimum cure time is required for new concrete prior to installation. Please contact our office for additional questions on all other cure times on concrete and additional surface

SAFETY PRECAUTIONS:
Ventilation: Local exhaust and mechanical ventilation are recommended.
Respiratory Protection: None required for normal use of product.
Protective Gloves: Neoprene or non-soluble plastic.
Eye Protection: Chemical splash goggles. Provide full flow eyewash station.
Work/Hygienic Practices: Wash hand before eating or smoking

SYSTEM COMPONENTS

MATERIALS COMPOSITION OF BOTH TRADITIONAL AND RAMP UP SYSTEMS:

SSTD-Mat: Pre-molded tactile dome sheet composed of fiber-reinforced, polymermodified cement and coated with an acrylic resin emulsion. Mats are 1mm thick with trun-cated domes 0.9 inches in diameters by 0.2 inches high.

SSTD-589 Bond Coat Adhesive: Water Based acrylic emulsion resin adhesive. 1 and 5 gallon.
SSTD-100 Top Coat: Water-Based, Pigmented acrylic 1, and 5 gallon.
SSTD TEXTURE: SKID RESISTANT SILICA

MAT PATTERNS: Inline (Square) Pattern: 1.67 inches on center each way. Wide Inline (Square) Pattern: 2.35 inches on center each way. Offset (Staggered) Pattern: 1.67 inches on center on the diagonal
Traditional Size -2”x 10 & 3’ x 10’.
Ramp Up Sizes – 2’ x 4’ , 2’ x 5’ , 3’ x 4’ , 3’ x 5’.

 

BC SSTD2X10W-04